Nexsan SATABoy

The Nexsan SATABoy is a 3U rack mount storage unit targeted at those who need a reliable but commodity priced storage array. Originally shipped as just a fibre channel solution, Nexsan has subsequently revamped it to accommodate iSCSI connectivity. With an entry level price of £11,250 it will appeal to the SME market who need to add enterprise level storage facilities.

The main chassis is a 3U box with 14 slots for hard disks. Nexsan ships 15 disks already mounted in their drive caddies. This speeds up installation and provides you with a spare in case of an emergency. This is important as you can only buy replacement disks from Nexsan. The disks in the SATABoy we received were Hitachi 500GB drives.

The chassis comes with two redundant power supplies and two controller cards. These cards support dual 2GB/s fibre ports and iSCSI. There is an Ethernet management port and a serial port for the initial setup and configuration.

Hardware installation was very easy. You attach the slides to the SATABoy and the rack then slide the SATABoy in. This is a heavy box and is a two man job as all the initial weight is in the back of the box. Once loaded into the rack, you interest the drives. Then slide easily into their slots and once installed you press a button to secure them.

At the back of the SATABoy, you connect power cords, fibre or Ethernet cables (depends on your choice of fibre channel or iSCSI) and a serial cable for configuration. Annoyingly, Nexsan does not to ship fibre cables with the SATABoy assuming that customers will have their own.

All of this took less than 15 minutes from unsealing the box to powering on. This was impressive.

Once you have powered on you attach the serial cable to a computer running a terminal emulator to do the initial setup. Alternatively, you can connect to the default IP address of the SATABoy web server and configure its IP addresses from there.

Once you have set the network address you can then use a browser to connect to the web server inside the SATABoy. The first time you connect to the SATABoy there is no password set on the admin account not are you forced to set one. HP and other vendors using web servers for managing appliances and printers have recently experienced security issues with web servers and Nexsan needs to address this.

There is a Quickstart setup that creates two RAID arrays and two volumes in each array. If you don't want to use these or want a different configuration, you have to wait until these are built, then delete them and start again. This is frustrating but Nexsan insists it created the Quickstart routine based on customer requests.

In order to change this you need to go through several different options on the menu to delete the volumes and then the arrays. Now you can create your own array with a choice of RAID 0, 1, 4, 5 or 6. Nexsan has also allowed you a relatively wide choice of stripe size ranging from 16 to 128kb. This means that arrays can be adapted for the type of media they are to hold, something which is often overlooked by storage administrators.

Arrays are created immediately and each gets a default volume of 2TB. You need to delete this and then recreate for the size you want. When creating a volume you can allocate a reserved area for later expansion. You can map each volume to a LUN and there is support for 32 LUNs per SATABoy.

One thing that the SATABoy we reviewed didn't have was an installation for Microsoft SimpleSAN. This is something that Nexsan's competitors are all providing and it takes care of configuring and installing the iSCSI drivers on the server.