Epson WorkForce Pro WF-C5210DW review: Quality that’s beyond reproach

High-quality printing is slow, but this colour inkjet offers excellent running costs and great-looking output

IT Pro RecommendedEpson WorkForce Pro WF-C5210DW
Price
£142 exc VAT
  • Good-value starter cartridges
  • Great networking and cloud support
  • Outstanding print quality
  • Slow high-quality and colour printing
  • No touchscreen

Cost-conscious SMBs may be wary of inkjets that are constantly running out of ink and demanding expensive refills – but Epson’s WorkForce Pro WF-C5210DW hits all the right notes, promising some of the largest ink yields in the business along with low running costs. Invest in Epson’s capacious XL 5,000-page cartridges and you’re looking at just 1.3p per mono page, and 5.7p for colour.

Even the supplied cartridges are good value. Rather than fobbing you off with half-empty starter supplies, Epson throws in a set of standard T902 3,000-page cartridges, which should last you a fair while before you need to start shopping for replacements.

There’s a good set of paper options too: the built-in 250-sheet paper cassette can be supplemented with a lower 500-sheet cassette for a very reasonable £130, while the 80-page tray at the rear handles stock of up to 256gsm. Ethernet, 802.11n wireless and USB 2 connections are all supported, along with AirPrint and Wi-Fi Direct, plus an NFC sensor for tap-to-print services. 

Installation is a piece of cake. Epson’s simple setup utility spotted the printer on our network right away, and automatically went off and downloaded the latest drivers for it, along with the latest firmware.

Next, a desktop status monitor is installed, which allows you to keep an eye on ink and maintenance status. You can also check these from the printer’s web console, and register the printer with Epson’s Connect remote print service. This sets up a dedicated, customisable email address just for your printer, enabling remote users to print documents by sending them as attachments. Even neater, Epson’s printer driver links up with your Connect account to send jobs directly from desktop apps to the remote printer, and access can be secured with a custom passkey.

Epson WorkForce Pro WF-C5210DW side angle

Print performance is fine for a medium-sized office. We found that Epson’s claimed maximum speed of 34ppm wasn’t attainable in the real world, but the printer’s 24ppm ISO rating proved more or less achievable. We had to wait seven seconds for our 24-page Word document to start printing, but it was then delivered in one minute flat at standard quality. The high-quality print mode is far slower, turning out the same document at barely over 6ppm, but you won’t normally need to use this, as standard mode is perfectly sharp enough for general office use, with only a hint of dusting around smaller fonts. 

You should note that printing in colour slows things down as well: our 24-page DTP-style document came out at 20.6ppm in standard mode and 5.8ppm in high quality. It’s worth the wait, though, as colour quality is excellent. Our graphics and photos looked sharp and detailed without a hint of banding – even in large single-colour areas. 

Access controls aren’t the most extensive we’ve seen, but you can password-protect the printer’s control panel, enable or disable the NFC sensor and create up to ten user accounts with custom restrictions. Confidential documents can be protected with a four-digit PIN for walk-up-and-print operations too, although entering the code is a little fiddly as the LCD panel isn’t a touchscreen. 

Mobile users, meanwhile, get to play with Epson’s iPrint app. No setup is required – as long as you’re on the same network as the printer, it will be detected – and as well as printing directly from your device, you can use the app to connect to Box, Dropbox, Evernote, Google Drive and Microsoft OneDrive accounts, and search and print cloud documents.

In all, the WF-C5210DW is a top choice for small businesses. High-resolution printing is slow, but running costs are far lower than you’ll get from typical lasers in this price range, and output quality is beyond reproach. Dave Mitchell

Epson WorkForce Pro WF-C5210DW specifications

Format

4,800 x 1,200dpi A4 inkjet printer  

Print speed

24ppm mono/colour  

Display

6.1cm colour LCD screen  

Networking

Gigabit Ethernet, 802.11n wireless  

Connectivity

USB 2, NFC

Print type

Duplex 

Tray size

250-sheet drawer, 80-sheet MPT

Recommended monthly duty cycle

2,500 pages

Dimensions

425 x 535 x 357mm

Weight

15.3kg

Warranty

1yr on-site warranty

Options (exc VAT)

500-sheet tray, £130 exc VAT

Featured Resources

Managing security risk and compliance in a challenging landscape

How key technology partners grow with your organisation

Download now

Security best practices for PostgreSQL

Securing data with PostgreSQL

Download now

Transform your MSP business into a money-making machine

Benefits and challenges of a recurring revenue model

Download now

The care and feeding of cloud

How to support cloud infrastructure post-migration

Watch now

Recommended

Best printers 2021
Hardware

Best printers 2021

19 Mar 2021
Lexmark C3426dw review: Laser precision
peripherals

Lexmark C3426dw review: Laser precision

25 Nov 2020
Canon i-Sensys LBP664Cx review: A great choice for small businesses
Hardware

Canon i-Sensys LBP664Cx review: A great choice for small businesses

18 Nov 2020
Epson WorkForce Pro WF-C529RDTW review: A flexible business-class printer
managed print services

Epson WorkForce Pro WF-C529RDTW review: A flexible business-class printer

11 Nov 2020

Most Popular

Microsoft is submerging servers in boiling liquid to prevent Teams outages
data centres

Microsoft is submerging servers in boiling liquid to prevent Teams outages

7 Apr 2021
Data belonging to 500 million LinkedIn users found for sale on hacker marketplace
hacking

Data belonging to 500 million LinkedIn users found for sale on hacker marketplace

8 Apr 2021
How to find RAM speed, size and type
Laptops

How to find RAM speed, size and type

8 Apr 2021