HPE ProLiant DL180 Gen10 review: A storage-centric marvel

Dual CPU sockets provide huge performance potential, while the storage capacity is great for the price

HPE ProLiant DL180 Gen10 front and rear
Price
£1,345 exc VAT (as reviewed)
  • Affordable entry price
  • Great expansion potential
  • High storage capacity
  • Automated management and OS remote control require upgraded licenses

Most servers can be upgraded and expanded as your needs grow, but HPE’s ProLiant DL180 Gen10 has more scope for growth than most. That’s thanks to a second CPU socket that allows you to move up to multiprocessor computing as and when you’re ready.

The entry price, meanwhile, is low, with lightweight specifications starting at just £986. This modest sum gets you out of the starting blocks with a six-core Xeon Scalable Bronze 3204 CPU, 16GB of DDR4 Smart Memory and eight LFF drive bays, cabled to the embedded HPE S100i software-based RAID controller. 

Move up to the £1,345 model on test and you get an eight-core Silver 4208 CPU, a full house of 12 LFF drive bays and HPE’s Smart Array P408i SATA/SAS3 RAID card with 2GB of cache and battery backup unit. Clearly, this is a configuration geared up for storage-centric workloads, but SFF fans will be pleased to know that the basic eight-bay model can be upgraded to 16 or 24 bays, with the option to add two more at the rear. 

The motherboard has both internal USB 3 and microSD card slots, which you can use to boot into an embedded hypervisor. To avoid wasting storage bays on boot media, HPE’s optional PCIe Enablement board supports a pair of mirrored M.2 SSDs to house your operating system, and is cabled to dedicated SATA interfaces on the motherboard.

Remote management functions are excellent. The server comes with HPE’s iLO5 chip and a Standard licence, which provides a stiff set of platform security features such as “silicon root of trust” to protect the server’s firmware and a web interface packed with valuable information about critical components. Be aware, though, that if you want to enable power metering, OS remote control and virtual media services, you’ll need to upgrade to the Advanced licence.

To try out the management features, we added the server’s iLO 5 details to the lab’s virtualised Hyper-V HPE OneView 5.5 app. We were then immediately able to monitor the health of all our ProLiant servers and gather inventory, and if you’ve shelled out for the Advanced iLO 5 licence then OneView can also provide data on system utilisation, thermals and power usage. However, in order to provision new servers and deploy automated firmware updates you’ll need yet another upgrade, this time to the OneView Advanced licence. 

HPE ProLiant DL180 Gen10 open chassis

Internally, the server presents a tidy layout, with the Smart Array P408i RAID card residing in a slot at the rear of the motherboard and cabled directly to the drive backplane. The server includes a riser with three PCIe slots, held in place by a locking tab that can be easily released with a flick of the wrist. If you install a second CPU, you can add another three-slot PCIe riser card, which fits next to the PSU bay.

Underneath the riser is a media module slot; HPE offers dual-port Gigabit Ethernet and 10GbE adapters that can be used to supplement the server’s dual embedded Gigabit ports. The CPU sockets are flanked on each side by banks of four DIMM slots. The base 16GB of DDR4 in the review system can be boosted to a maximum of 1TB, and installing the second CPU activates its attendant DIMM slots, allowing memory capacity to be doubled to 2TB. 

Expanding businesses searching for a powerful Xeon Scalable server with a big upgrade path will find the ProLiant DL180 Gen10 a great choice. The price above doesn’t include any storage, and you may well want to factor in the cost of upgrading the iLO5 controller too, but base systems are very affordable and provide enormous expansion potential. 

HPE ProLiant DL180 Gen10 specifications

Chassis

2U rack chassis

CPU

2.1GHz Intel Xeon Scalable Silver 4208 CPU (max 2)

Memory

16GB DDR4 (max 2TB with 2 CPUs)

Storage bays

12 x LFF hot-swap bays

Storage included

N/A

PSU

500W cold-swap PSU (max 2)

RAID support

RAID0, 1, 5, 6, 10, 50, 60, 1 ADM, 10 ADM

Network

2 x Gigabit Ethernet

Other ports

3 x PCIe 3 (max 6), HPE Smart Array P408i-a SAS3/2GB with FBWC/BBU

Management

HPE iLO5 Standard with Gigabit Ethernet

Warranty

3yr on-site NBD warranty

Featured Resources

Unlocking collaboration: Making software work better together

How to improve collaboration and agility with the right tech

Download now

Four steps to field service excellence

How to thrive in the experience economy

Download now

Six things a developer should know about Postgres

Why enterprises are choosing PostgreSQL

Download now

The path to CX excellence for B2B services

The four stages to thrive in the experience economy

Download now

Recommended

HPE MSA 2060 Storage review: Storage tiering for dummies
Server & storage

HPE MSA 2060 Storage review: Storage tiering for dummies

3 Mar 2021
HPE acquires cloud intelligence platform CloudPhysics
cloud computing

HPE acquires cloud intelligence platform CloudPhysics

26 Feb 2021
HPE ProLiant MicroServer Gen10 Plus review: Pint-sized perfection
Server & storage

HPE ProLiant MicroServer Gen10 Plus review: Pint-sized perfection

5 Jan 2021
HPE warns of a critical zero-day flaw in server management software
zero-day exploit

HPE warns of a critical zero-day flaw in server management software

18 Dec 2020

Most Popular

Microsoft is submerging servers in boiling liquid to prevent Teams outages
data centres

Microsoft is submerging servers in boiling liquid to prevent Teams outages

7 Apr 2021
Hackers are using fake messages to break into WhatsApp accounts
instant messaging (IM)

Hackers are using fake messages to break into WhatsApp accounts

8 Apr 2021
How to find RAM speed, size and type
Laptops

How to find RAM speed, size and type

8 Apr 2021