Dell PowerEdge VRTX review
Dell makes blade servers affordable for SMBs with its unique design.
Another clever design feature is the VRTX's PCI-e architecture. The chassis has eight PCI-e Gen2 slots which can be assigned to any server node using the management interface.
Advantages over blade servers are obvious as the VRTX doesn't lock you into proprietary I/O solutions. If you want to connect a node to an FC SAN you just buy a standard FC HBA. A blade server would require an FC mezzanine card fitted to the server blade and an FC SAN I/O module installed at the back.
Each VRTX node also has a 10GbE mezzanine card which links directly via the midplane to an 8-port switch at the rear. This is a basic L2 Gigabit switch and Dell advised us it plans to offer a 10GbE version as well.
The CMC web interface provides full remote access to all VRTX chassis components
Power and noise
The chassis supports up to four redundant 1100W hot-plug PSUs. Cooling is handled by four hot-plug fan modules at the rear plus six more inside and noise levels are impressively low.
Our review system came with all four PSUs and two M620 dual 2GHz E5-2650 server nodes. We also found power consumption to be low with the chassis drawing 185W.
One node with Windows Server 2012 in idle increased this to 272W which went up to 338W with the second node. Using SiSoft Sandra, we recorded peak draws of 405W for one server node and 604W for both.
Chassis storage can be carved up into RAID protected virtual disks and assigned to specific server nodes
A small colour LCD panel and keypad at the front provide local access for basic configuration and monitoring. There's also a KVM module below which can be assigned to any node using the keypad.
The web interface for the chassis management controller (CMC) is well designed and provides full access to all components. It opens with graphical views of the front and rear of the chassis plus fault alerts and overviews of storage and power usage.
Quick links for common tasks are provided and we found assigning virtual disks and PCI-e slots to the nodes simple enough. The menu to the left provides access to each node and along with power controls you can directly access their own iDRAC7 controller.
Pricing has yet to be confirmed but Dell provided us with a guide price of 8,600 ex VAT for a base system. This includes two M520 nodes each with a 1.8GHz E5-2403 Xeon, 8GB of DDR3, a 500GB SATA drive and Dell's iDRAC7 Express controller.
The chassis comes with a single CMC, dual 1100W PSUs and three 1TB Near-Line SAS drives. This price also includes Dell's standard three year NBD warranty for the chassis and nodes.
The PowerEdge VRTX takes blade server technology, adds a few twists of its own and makes it more affordable for SMBs. It's built like a tank, is easy to manage and its shared storage and PCI-e architecture adds extra levels of versatility you won't find in blade servers.
SMBs and remote offices looking to consolidate IT services on a single hardware platform should consider Dell’s new PowerEdge VRTX. It’s far more affordable than a blade server and its unique storage and PCI-e shared architecture makes it very versatile.
Chassis: 5U rack or pedestalShared storage: 12 x LFF or 25 x SFF hot-swap hard disk baysRAID: Shared PERC8 (max 2)Array support: RAID0, 1, 10, 5, 6Expansion: 8 x PCI-e Gen2Network: 8-port L2 Gigabit switch bladePower: 1100W hot-plug PSUs (min 2, max 4)Management: Dell CMC Enterprise (max 2 CMCs)Server Nodes: Dell PowerEdge M520 or M620 (max 4)Warranty: 3yrs on site NBD on chassis and nodes