DrayTek VigorBX 2000ac review

A feature-packed router and IP PBX combo that’s ideal for SMBs seeking an all-in-one networking solution

  • Heaps of features; Customisable call handling
  • Auto-provisioning plagued by bugs

We're big fans of DrayTek's SMB routers, and the VigorBX 2000ac delivers combines their trademark strengths with an integrated IP PBX. Along with dual-band 802.11ac wireless, it offers triple WAN redundancy, an SPI firewall, optional web-content filtering and all the VPN services you can eat.

It works brilliantly as a small business IP PBX, with support for 12 SIP trunks, 50 IP phone extensions and 20 simultaneous calls. Call handling features are extensive, and include dial plans, hunt groups, voice mail, an auto-attendant and much more.

Advertisement - Article continues below

The router's web interface provides plenty of wizards covering initial setup, VPNs and, of course, management of the IP PBX itself. WAN failover support is excellent: the router has an integrated ADSL2+/VDSL2 interface, along with a Gigabit WAN port, and will accept a 3G or 4G USB adapter.

Via the Ethernet WAN port, we had internet access running in under minute, enabling us to jump right into the IP PBX. Our first job was to link the router to our Sipgate SIP trunk, which was as easy as you could ask for: after we'd entered our account details, the Sipgate web portal immediately showed it as registered.

We then defined our office hours, so the auto-attendant could give appropriate messages to callers depending on the time of day, and set about creating extensions. For each of these, the process lets you define a unique number, create a user account with a password and a voicemail PIN, and specify which SIP trunks they're allowed to use. It's also possible to set certain extensions to use PSTN lines, so you're covered if internet access goes down.

Advertisement - Article continues below
Advertisement - Article continues below

Next, we customised each extension's call answering modes: if a call goes unanswered for so many seconds, is busy or offline, it can be passed to voicemail, forwarded to another extension or group or passed to the auto-attendant. For general call handling, the IP PBX comes with a bunch of predefined messages, but to use the auto-attendant you'll need to record some messages of your own, using a PSTN phone on one of the analogue ports. Once this is done, a wizard takes you through all the necessary steps to ensure a caller gets to the right person.

Incoming voicemail is, by default, stored on the router's embedded NAND flash. This offers a decent amount of space: after we'd left ourselves nine messages, totalling around 4 minutes, it showed 99% capacity still remaining. You can prevent chatty callers from eating up all your storage by limiting messages to 30 or 60 seconds: those who need a bigger buffer can plug in a USB flash drive and use that instead. If you've set up an SMTP mail server for the router, voicemails can also be forwarded to their recipients as email attachments and immediately deleted from its internal storage.

Advertisement - Article continues below

Sadly, the extension auto-provisioning feature proved to be a non-starter with our Yealink IP phones: we entered their MAC addresses as requested, but they refused to pick up profiles. This wasn't a deal-breaker, as we were able to register them by manually entering account details in each phone's web interface, but having to do this for every user could be an annoyance for a larger office.

Trying out DrayTek's free Windows softphone wasn't a seamless experience either. The utility is over five years old, and refused to work with the integrated audio systems on four of our test PCs. It did install successfully on a PC with a Creative Labs sound card; then we found that IP PBX auto-discovery didn't work either, so we had to enter account details manually.

These provisioning issues may make it a tedious task to get set up, but this router can't be faulted for its call-handling features. SMBs that don't want a cloud-based solution will find DrayTek's versatile VigorBX 2000ac has every networking angle covered.

Advertisement - Article continues below

This review originally appeared in PC Pro issue 272


These provisioning issues may make it a tedious task to get set up, but this router can't be faulted for its call-handling features. SMBs that don't want a cloud-based solution will find DrayTek's versatile VigorBX 2000ac has every networking angle covered.

Desktop chassis 7 x Gigabit Ethernet (6 x LAN, 1 x WAN2) ADSL2+/VDSL2 interface 2 x USB 2 1 x FXS/2 x FXO analogue ports Dual-band 802.11ac wireless External power supply 241 x 166 x 44mm (WDH) 2yr RTB warranty

Featured Resources

Preparing for long-term remote working after COVID-19

Learn how to safely and securely enable your remote workforce

Download now

Cloud vs on-premise storage: What’s right for you?

Key considerations driving document storage decisions for businesses

Download now

Staying ahead of the game in the world of data

Create successful marketing campaigns by understanding your customers better

Download now

Transforming productivity

Solutions that facilitate work at full speed

Download now

Most Popular

Google Android

Over two dozen Android apps found stealing user data

7 Jul 2020

How to find RAM speed, size and type

24 Jun 2020

The road to recovery

30 Jun 2020