Zyxel GS1350-12HP review: A security saviour
A smart PoE switch that puts self-healing surveillance networks firmly within an SMB price range
Zyxel’s GS1350 series of Layer 2 switches make perfectly fine general-purpose PoE switches, but they’re especially well-suited to driving IP cameras. The distinctive Auto Recovery feature keeps a watchful eye on all powered devices and can automatically power-cycle any that become unresponsive, while Zyxel’s patented surge protection circuitry also protects exterior cameras from lightning strikes.
The switch family comprises four models, ranging from the six-port GS1350-6HP up to the rackmount, 26-port GS1350-26HP. We tested the GS1350-12HP, which presents eight Gigabit Ethernet ports providing 802.3at PoE+ services, along with two pairs of unpowered copper and fibre dual-personality ports.
The unit has a reasonable power budget of 130W, and an extended-range mode that overcomes the 100m PoE cable length limitation, allowing powered devices to be placed up to 250m away. It can supply up to 15W of power in this mode, but it’s not suitable for devices that handle high volumes of traffic as – like most other PoE extenders – the link speed drops to 10Mbits/sec.
For management, you can use either the switch’s own web portal or the free Zyxel One Network (ZON) Windows utility. Root around the web console and you’ll also find the option to enable discovery by Zyxel’s Nebula Control Center cloud management platform: this is currently non-functional, but Zyxel plans to activate the feature in a few months.
The first time you access the web console, you’ll be greeted by a quick-start wizard that insists you change the default admin password and SNMP community name. Once you’re in, you might be a little disappointed to find that there’s no graphical overview of ports in use, but the console does provide plenty of information on switch utilisation, plus details of port and PoE usage; you can keep a close eye on individual power being supplied to each port, see the total draw and monitor power budget usage.
If you’re worried about breaching the power budget, each PoE port can be set to one of three priority levels, with lower-priority ports being automatically turned off should the drain reach the power threshold. You can also set up profiles to control when power is supplied to selected ports, using custom time schedules to automatically disable them when they’re not needed.
Then there’s the brilliant Auto Recovery feature, which uses either LLDP or Ping to verify that the device attached to a specified port is active, and cycles the power if it doesn’t receive a response after a set number of attempts. You can decide how often each port is polled, set the wait time between power cycles and tell the switch how many times it should turn the device off and on again before giving up. You can also generate an SNMP trap and log whenever an unresponsive device is rebooted, although email alerting isn’t supported.
Lastly there’s the Neighbor web page, which shows the status of all powered devices, along with the IP addresses and hostnames of those that support LLDP. Coloured icons indicate whether each device is up, down or being rebooted, and you can manually force a power cycle on any port. If the device is an IP camera, you can open its web interface directly from the switch’s console simply by clicking on its IP address if displayed. Helpfully, if the switch itself needs to be rebooted – for example, for a firmware upgrade – this can be done without cutting the power and network connectivity for attached devices.
If your physical security is being compromised by flaky IP cameras, the GS1350-12HP could be the answer to your prayers, helping to ensure around-the-clock surveillance with no human intervention. It’s also good value, very easy to deploy and more than capable of regular switch duties, making it a top choice for small businesses.
How virtual desktop infrastructure enables digital transformation
Challenges and benefits of VDIFree download
The Okta digital trust index
Exploring the human edge of trustFree download
Optimising workload placement in your hybrid cloud
Deliver increased IT agility with the cloudFree Download
Modernise endpoint protection and leave your legacy challenges behind
The risk of keeping your legacy endpoint security toolsDownload now